|
PC-TCS Controller
| PC-TCS is a Personal Computer
based Telescope Control System
designed for use with moderate to large permanently mounted
astronomical telescopes. The software will run on all IBM-class
computers.
PC-TCS provides the
observer with a highly flexible battery of motion control
functions handsomely matching the demands of astronomical
observing. As much as possible, system complexity is minimized by
the use of a "Menu Driven" user interface that, in most
cases, requires only single keystrokes to make the telescope
perform complex tasks.
Learn
more about PC-TCS>>
And all PC-TCS-controlled OGS telescope systems
will script with the integration of this ASCOM compliant operating
system.
Learn
more about ASCOM>> |
|
RC14.5-HP75G
|
Optical System
|
Ritchey-Chretien
|
| Primary Diameter |
14.5" |
| Specular Precision |
1/25, or better, wave front RMS |
| Mirror Substrate |
Near-zero expansion ceramic |
| Focal Ratio |
f/7.9 |
| Image Scale |
49.9 arc sec/mm |
| Tube Diameter |
18" |
| Tube Length |
40" |
| Tube Active Cooling |
12 V DC fans |
| Material |
Magnesium |
| Focuser Tube I.D. |
2.7" |
| Available Back Focus |
9" |
| Secondary Diameter |
5.5" |
| Sec. Focus Range (electric standard) |
5" |
| Focus Stabilization, w. Al tube |
Invar 36 |
Mounting (not shown)
|
HP-75 German Eq.
|
| Aux. Instrument Cap. |
55 lbs. |
| Tracking Precision |
<2 arc sec RMS (after modeling) |
| Pointing Precision |
<30 arc sec RMS (after modeling) |
| R. A. Drive |
11.3" 360 tooth worm gear &
ball bearing worm |
| DEC Drive |
14" tangent arm (12VDC Drive) |
| Shafts |
3.0" Ø (75mm at bearing ends) |
| Motors |
115VAC Synchronous |
| Axis Intersection |
66" from base of pier (at 40°) |
| Weight (system) |
345 lbs. |
| R. A. Counterweights |
2 x 30 lbs. |
| Pier |
42" high, typically (custom
heights available) |
| Fasteners |
18-8 stainless steel |
|
