|
PC-TCS Controller
| PC-TCS is a Personal Computer
based Telescope Control System
designed for use with moderate to large permanently mounted
astronomical telescopes. The software will run on all IBM-class
computers.
PC-TCS provides the
observer with a highly flexible battery of motion control
functions handsomely matching the demands of astronomical
observing. As much as possible, system complexity is minimized by
the use of a "Menu Driven" user interface that, in most
cases, requires only single keystrokes to make the telescope
perform complex tasks.
Learn
more about PC-TCS>>
And all PC-TCS-controlled OGS telescope systems
will script with the integration of this ASCOM compliant operating
system.
Learn
more about ASCOM>> |
|
Click on pictures
for a larger image.
RC24-140FN
|
Optical System
|
Ritchey-Chretien
|
| Primary Diameter |
24.0" |
| Specular Precision |
1/25, or better, wave front
RMS |
| Mirror Substrate |
Near-zero expansion ceramic |
| Focal Ratio |
f/8.0 |
| Image Scale |
42.1 arc sec/mm |
| Tube Diameter |
29" |
| Tube Length |
66" |
| Tube Cooling |
12
V DC fans (active cooling) |
| Material |
AL |
| Focuser Tube I.D. |
4.2" |
| Available Back Focus |
11.5" |
| Secondary Diameter |
8.5" |
| Sec. Focus Range (electric
standard) |
12" |
| Focus Stabilization, w. Al tube |
Invar 36 |
Mounting
|
OGS-140 Fork
|
| Aux. Instrument Cap. |
75
lbs. |
| Tracking Precision |
<1 arc sec RMS (after modeling) |
| Pointing Precision |
<30 arc sec RMS (after modeling) |
| R. A. Drive |
18"
570 tooth worm gear & ball
bearing worm |
| DEC Drive |
15" 360 tooth worm gear & ball
bearing worm |
| Shafts |
6.0" Ø (140mm at R. A. bearing
ends; 75mm at DEC ends) |
| Motors |
Five-phase nano-step |
| Axis Intersection |
72" from base of pier (at 40°) |
| Fork Swing Clearance |
18" |
| Weight (system) |
1025
lbs. |
| R. A. Counterweights |
2 x
5 lbs. |
| Pier |
32" high, typically (custom
heights available) |
| Fasteners |
18-8 stainless steel |
|
